Eugene, Oregon

BungedUP: Shop
in: Parts - Other

90 views | 5 comments | 1 faves

Shop
...

1.5 Headtube I made for another member.

Eugene, Oregon

BungedUP: Shop
in: Parts - NonBike

39 views

Eugene, Oregon

BungedUP: Shop
in: Parts - NonBike

34 views

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

103 views | 1 comments

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the topside of the base plate, without the rails installed.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

69 views

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the topside of the base plate, without the rails installed.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

57 views | 1 comments

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the topside of the base plate, without the rails installed.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

58 views

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the topside of the base plate, without the rails installed.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

29 views

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the bottom of the base plate, with the T-slot shown.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

37 views

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. This is the bottom of the base plate, with the T-slot shown.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

28 views

Shop
Nobody

Base plate for chainstay/chainstay jig I am building. The bar stock on top is what I will use for the rails (2).

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

26 views

Shop
Nobody

Sketches for the riser block for the chainstay/seatstay jig. A dummy axle holder will mount to this, and allow for vertical movement. The riser slides back and forth on the dummy plate.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

69 views

Home
____

Miniature Horizontal Mill from early/mid 1900's. I will finish this project someday! It came with the Big Oesterlein I bought.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

73 views

Home
____

Misc. milling stuff

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

32 views

Home
____

My 1.5 HP Leeson motor and variable frequency drive. This will be going on the 2nd lathe someday.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

62 views

Home
____

My repainted Lincoln Invertec V200T TIG welder.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

69 views

Home
____

Closeup of new BB shell fixturing system. I have a swappable BB shell cones (for BMX and standard Shells), as well as shell width spacers for 100, 90, 83, 73, and 68 mm shells.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

62 views

Home
____

New seat tube fixturing plate I made to make floating/offset seatmast adjustments easier.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

77 views | 1 faves

Home
____

Revised jig. I'll be building a new stand support for the jig soon.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

54 views

Home
____

Frame jig area of the shop.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

69 views

Home
____

1 of 2 lathes (main one in an operational state).

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

87 views

Home
____

Bison 2 position machining vise, sitting on top of an 8" rotary table. This is what I use for mitering much of the frame tubing.

Eugene, Oregon

BungedUP: Shop
in: Deleted

66 views

Home
____

Duplicate photo D'oh

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

54 views

Home
____

View of part of the shop.

Eugene, Oregon

BungedUP: Shop
in: Parts - Other

54 views

Home
____

Another view of the back of the shop.